MSY is now offering a new PC Repairs and Upgrades service, designed to boost your computer's performance affordably. As an introductory offer for this service, we're providing free Hardware Diagnosis to all customers who book online. Our service covers a range of common PC issues:
• Booting problems or blue screen errors • Hard drive failures • Power supply issues • Slow computer performance • Unusual or loud noises • Viruses • Visual glitches and errors
For any of these problems, we are ready to repair and upgrade your PC with new components as needed. Our team of technicians is both friendly and patient, ensuring efficient problem resolution.
Please note: We do not offer laptop repairs.
For more details and to book your service at $0 (online) or $60 (walk-in), please visit MSY's website.
Book online to get a FREE 30-minutes Basic Diagnosis!
This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Specifications
JEDEC standard 1.5V (1.425V ~1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 800MHz fCK for 1600Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address 000 only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C Asynchronous Reset PCB : Height 1.180 (30.00mm), single sided component
